passwd
User Commands passwd(1)NAME
passwd - change login password and password attributesSYNOPSIS
passwd [ -r files | -r ldap | -r nis | -r nisplus ] [ name ] passwd [ -r files ] [ -egh ] [ name ] passwd [ -r files ] -s [ -a ] passwd [ -r files ] -s [ name ] passwd [ -r files ] [ -d | -l ] [ -f ] [ -n min ] [ -w warn ] [ -x max ] name passwd -r ldap [ -egh ] [ name ] passwd -r nis [ -egh ] [ name ] passwd -r nisplus [ -egh ] [ -D domainname ] [ name ] passwd -r nisplus -s [ -a ] passwd -r nisplus [ -D domainname ] -s [ name ] passwd -r nisplus [ -l ] [ -f ] [ -n min ] [ -w warn ] [ -x max ] [ -D domainname ] nameDESCRIPTION
The passwd command changes the password or lists password attributes associated with the user's login name. Addition- ally, privileged users may use passwd to install or change passwords and attributes associated with any login name. When used to change a password, passwd prompts everyone for their old password, if any. It then prompts for the new password twice. When the old password is entered, passwd checks to see if it has "aged" sufficiently. If "aging" is insufficient, passwd terminates; see pwconv(1M), nist- bladm(1), and shadow(4) for additional information. When LDAP, NIS, or NIS+ is in effect on a system, passwd changes the NIS or NIS+ database. The NIS or NIS+ password may be different from the password on the local machine. If NIS or NIS+ is running, use passwd -r to change password information on the local machine. The pwconv command creates and updates /etc/shadow with information from /etc/passwd. pwconv relies on a special value of 'x' in the password field of /etc/passwd. This value of 'x' indicates that the password for the user is SunOS 5.8 Last change: 21 Oct 1999 1 User Commands passwd(1) already in /etc/shadow and should not be modified. If aging is sufficient, a check is made to ensure that the new password meets construction requirements. When the new password is entered a second time, the two copies of the new password are compared. If the two copies are not identical, the cycle of prompting for the new password is repeated for, at most, two more times. Passwords must be constructed to meet the following require- ments: + Each password must have PASSLENGTH characters, where PASSLENGTH is defined in /etc/default/passwd and is set to 6. Only the first eight characters are signifi- cant. + Each password must contain at least two alphabetic characters and at least one numeric or special charac- ter. In this case, "alphabetic" refers to all upper or lower case letters. + Each password must differ from the user's login name and any reverse or circular shift of that login name. For comparison purposes, an upper case letter and its corresponding lower case letter are equivalent. + New passwords must differ from the old by at least three characters. For comparison purposes, an upper case letter and its corresponding lower case letter are equivalent. If all requirements are met, by default, the passwd command will consult /etc/nsswitch.conf to determine in which repo- sitories to perform password update. It searches the passwd and passwd_compat entries. The sources (repositories) asso- ciated with these entries will be updated. However, the password update configurations supported are limited to the following cases. Failure to comply with the configurations will prevent users from logging onto the system. The pass- word update configurations are: + passwd: files + passwd: files ldap + passwd: files nis + passwd: files nisplus + passwd: compat (==> files nis) SunOS 5.8 Last change: 21 Oct 1999 2 User Commands passwd(1) + passwd: compat (==> files ldap) passwd_compat: ldap + passwd: compat (==> files nisplus) passwd_compat: nisplus Network administrators, who own the NIS+ password table, may change any password attributes. In the files case, superusers (for instance, real and effec- tive uid equal to 0, see id(1M) and su(1M)) may change any password; hence, passwd does not prompt privileged users for the old password. Privileged users are not forced to comply with password aging and password construction requirements. A privileged user can create a null password by entering a carriage return in response to the prompt for a new pass- word. (This differs from passwd -d because the "password" prompt will still be displayed.) If NIS is in effect, superuser on the root master can change any password without being prompted for the old NIS passwd, and is not forced to comply with password construction requirements. Normally, passwd entered with no arguments will change the password of the current user. When a user logs in and then invokes su(1M) to become super-user or another user, passwd will change the original user's password, not the password of the super-user or the new user. Any user may use the -s option to show password attributes for his or her own login name, provided they are using the -r nisplus argument. Otherwise, the -s argument is res- tricted to the superuser. The format of the display will be: name status mm/dd/yy min max warn or, if password aging information is not present, name status where name The login ID of the user. status SunOS 5.8 Last change: 21 Oct 1999 3 User Commands passwd(1) The password status of name: PS stands for passworded or locked, LK stands for locked, and NP stands for no password. mm/dd/yy The date password was last changed for name. (Note that all password aging dates are determined using Greenwich Mean Time (Universal Time) and therefore may differ by as much as a day in other time zones.) min The minimum number of days required between password changes for name. MINWEEKS is found in /etc/default/passwd and is set to NULL. max The maximum number of days the password is valid for name. MAXWEEKS is found in /etc/default/passwd and is set to NULL. warn The number of days relative to max before the password expires and the name will be warned. Security passwd uses pam(3PAM) for password management. The PAM con- figuration policy, listed through /etc/pam.conf, specifies the password modules to be used for passwd. Here is a par- tial pam.conf file with entries for the passwd command using the UNIX password module: passwd required password /usr/lib/security/pam_unix.so.1 If there are no entries for the passwd service, then the entries for the "other" service will be used. If multiple password modules are listed, then the user may be prompted for multiple passwords.OPTIONS
The following options are supported: -r Specifies the repository to which an operation is applied. The supported repositories are files, ldap, nis, or nisplus. -e Changes the login shell. For the files repository, this only works for the super-user. Normal users may change the ldap, nis, or nisplus repositories. The choice of shell is limited by the requirements of getusershell(3C). If the user currently has a shell that is not allowed by getusershell, only root may change it. -g Changes the gecos (finger) information. For the files SunOS 5.8 Last change: 21 Oct 1999 4 User Commands passwd(1) repository, this only works for the superuser. Normal users may change the ldap, nis, or nisplus reposi- tories. -h Changes the home directory. -D domainname Consults the passwd.org_dir table in domainname. If this option is not specified, the default domainname returned by nis_local_directory(3NSL) will be used. This domain name is the same as that returned by domainname(1M). -s name Shows password attributes for the login name. For the nisplus repository, this works for everyone. However for the files repository, this only works for the superuser. It does not work at all for the nis reposi- tory which does not support password aging. -a Shows password attributes for all entries. Use only with the -s option; name must not be provided. For the nisplus repository, this will show only the entries in the NIS+ password table in the local domain that the invoker is authorized to "read". For the files reposi- tory, this is restricted to the superuser. Privileged User Options Only a privileged user can use the following options: -f Forces the user to change password at the next login by expiring the password for name. -l Locks password entry for name. -n min Sets minimum field for name. The min field contains the minimum number of days between password changes for name. If min is greater than max, the user may not change the password. Always use this option with the -x option, unless max is set to -1 (aging turned off). In that case, min need not be set. -w warn Set warn field for name. The warn field contains the number of days before the password expires and the user is warned. This option is not valid if password aging is disabled. -x max Sets maximum field for name. The max field contains the number of days that the password is valid for SunOS 5.8 Last change: 21 Oct 1999 5 User Commands passwd(1) name. The aging for name will be turned off immedi- ately if max is set to -1. If it is set to 0, then the user is forced to change the password at the next login session and aging is turned off. -d Deletes password for name. The login name will not be prompted for password. It is only applicable to the files repository.OPERANDS
name User login name. ENVIRONMENT VARIABLES If any of the LC_* variables, that is, LC_CTYPE, LC_MESSAGES, LC_TIME, LC_COLLATE, LC_NUMERIC, and LC_MONETARY (see environ(5)), are not set in the environ- ment, the operational behavior of passwd for each corresponding locale category is determined by the value of the LANG environment variable. If LC_ALL is set, its con- tents are used to override both the LANG and the other LC_* variables. If none of the above variables is set in the environment, the "C" (U.S. style) locale determines how passwd behaves. LC_CTYPE Determines how passwd handles characters. When LC_CTYPE is set to a valid value, passwd can display and handle text and filenames containing valid charac- ters for that locale. passwd can display and handle Extended Unix Code (EUC) characters where any indivi- dual character can be 1, 2, or 3 bytes wide. passwd can also handle EUC characters of 1, 2, or more column widths. In the "C" locale, only characters from ISO 8859-1 are valid. LC_MESSAGES Determines how diagnostic and informative messages are presented. This includes the language and style of the messages, and the correct form of affirmative and negative responses. In the "C" locale, the messages are presented in the default form found in the program itself (in most cases, U.S. English). EXIT STATUS The passwd command exits with one of the following values: 0 Success. 1 Permission denied. 2 Invalid combination of options. SunOS 5.8 Last change: 21 Oct 1999 6 User Commands passwd(1) 3 Unexpected failure. Password file unchanged. 4 Unexpected failure. Password file(s) missing. 5 Password file(s) busy. Try again later. 6 Invalid argument to option. 7 Aging option is disabled.FILES
/etc/oshadow /etc/shells /etc/passwd Password file. /etc/shadow" Shadow password file. /etc/default/passwd Default values can be set for the following flags in /etc/default/passwd. For example: MAXWEEKS=26 MAXWEEKS Maximum time period that password is valid. MINWEEKS Minimum time period before the password can be changed. PASSLENGTH Minimum length of password, in characters. WARNWEEKS Time period until warning of date of password's ensuing expiration.ATTRIBUTES
See attributes(5) for descriptions of the following attri- butes: SunOS 5.8 Last change: 21 Oct 1999 7 User Commands passwd(1) ____________________________________________________________ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | |_____________________________|_____________________________| | Availability | SUNWcsu | |_____________________________|_____________________________| | CSI | Enabled | |_____________________________|_____________________________|SEE ALSO
finger(1), login(1), nispasswd(1), nistbladm(1), yppasswd(1), domainname(1M), eeprom(1M), id(1M), passmgmt(1M), pwconv(1M), su(1M), useradd(1M), userdel(1M), usermod(1M), crypt(3C), getpwnam(3C), getspnam(3C), getusershell(3C), nis_local_directory(3NSL), pam(3PAM), loginlog(4), nsswitch.conf(4), pam.conf(4), passwd(4), sha- dow(4), attributes(5), environ(5), pam_unix(5), pam_ldap(5)NOTES
The passwd command replaces the nispasswd and yppasswd com- mands and should be used in their place. SunOS 5.8 Last change: 21 Oct 1999 8