User Commands lp(1)
NAMElp - submit print request
SYNOPSISlp [ -c ] [ -m ] [ -p ] [ -s ] [ -w ] [ -d destination ] [ -f form-name ] [ -H special-handling ] [ -n number ] [ -o option ] [ -P page-list ] [ -q priority-level ] [ -S character-set | print-wheel ] [ -t title ] [ - T content-type [ -r ] ] [ -y mode-list ] [ file ... ] lp -i request-ID ... [ -c ] [ -m ] [ -p ] [ -s ] [ -w ] [ -d destination ] [ -f form-name ] [ -H special-handling ] [ -n number ] [ -o option ] [ -P page-list ] [ -q priority-level ] [ -S character-set | print-wheel ] [ -t title ] [ -T content-type [ -r ] ] [ -y mode-list ]
DESCRIPTIONlp submits print requests to a destination. There are two formats of the lp command. The first form of lp prints files (file) and associated information (collectively called a print request). If file is not specified, lp assumes the standard input. Use a hyphen (`-') with file to specify the standard input. Files are printed in the order in which they appear on the command line. The second form of lp changes print request options. This form of lp can only be used on a Solaris 2.6 Operating Environment or compatible versions of the LP print server. The print request identified by request-ID is changed according to the printing options specified. The printing options available are the same as those with the first form of the lp. If the request has finished printing when the lp command is executed, the change is rejected. If the request is in the process of printing, it will be stopped and res- tarted from the beginning (unless the -P option has been given). The print client commands locate destination information in a very specific order. See printers(4) and printers.conf(4) for details.
OPTIONSPrinters that have a 4.x or BSD-based print server are not configured to handle BSD protocol extensions. lp handles print requests sent to such destinations differently (see NOTES). The following options are supported: -c Copies file before printing. SunOS 5.8 Last change: 16 Jan 1998 1 User Commands lp(1) Unless -c is specified, users should not remove any file before the print request has completely printed. Changes made to file after the print request is made but before it is printed will be reflected in the printed output. file will be linked (as opposed to copied). -d destination Prints file on a specific destination. Destination can be either a printer of a class of printers, (see lpadmin(1M)). Specify destination using atomic, POSIX-style (server:destination), or Federated Naming Service (FNS) (.../service/printer/...) names. See printers.conf(4) for information regarding the naming conventions for atomic and FNS names, and standards(5) for information regarding POSIX. -f form-name Prints file on form-name. The LP print service ensures that the form is mounted on the printer. The print request is rejected if the printer does not support form-name, if form-name is not defined for the system, or if the user is not allowed to use form-name (see lpforms(1M)). -H special-handling Prints the print request according to the value of special-handling. The following special-handling values are acceptable: hold Do not print the print request until notified. If printing has already begun, stop it. Other print requests will go ahead of a request that has been put on hold (held print request) until the print request is resumed. resume Resume a held print request. If the print request had begun to print when held, it will be the next print request printed, unless it is superseded by an immediate print request. immediate Print the print request next. If more than one print request is assigned, the most recent print request is printed next. If a print request is currently printing on the desired printer, a hold request must be issued to allow the immedi- ate request to print. The immediate request is only available to LP administrators. SunOS 5.8 Last change: 16 Jan 1998 2 User Commands lp(1) -m Sends mail after file has printed (see mail(1)). By default, no mail is sent upon normal completion of a print request. -n number Prints a specific number of copies of file. Specify number as a digit. The default for number is 1. -o option Specify printer-dependent options. Specify several options by specifying -o option multiple times. ( -o option -o option -o option ). Printer-dependent options may also be specified using the -o keyletter once, followed by a list of options enclosed in double quotes ( -o " option option option" ). The following options are valid: nobanner Do not print a banner page with the request. This option can be disallowed by the LP adminis- trator. nofilebreak Prints multiple files without inserting a form feed between them. length=numberi|numberc|number Prints the print request with pages of a specific length. Specify length in inches, cen- timeters, or number of lines. Use number to specify the number of inches, centimeters or lines. Indicate inches or centimeters by append- ing the letter i for inches, c for centimeters to number. Indicate the the number of lines by specifying number alone. length=66 indicates a page length of 66 lines. length=11i indicates a page length of 11 inches. length=27.94c indi- cates a page length of 27.94 centimeters. This option may not be used with the -f option. width=numberi|numberc|number Prints the print request with with pages of a specific width. Specify width in inches, centimeters, or number of columns. Use number to specify the number of inches, centimeters or lines. Indicate inches or cen- timeters by appending the letter i for inches, c for centimeters to number. Indicate the the number of lines by specifying number alone. width=65 indicates a page width of 65 columns. width=6.5i indicates a page SunOS 5.8 Last change: 16 Jan 1998 3 User Commands lp(1) width of 6.5 inches. width=10c indicates a page width of 10 centimeters. This option may not be used with the -f option. lpi=number Prints the print request with the line pitch set to number lines in an inch. Use number to specify the number of lines in an inch. This option may not be used with the -f option. cpi=n|pica|elite|compressed Prints the print request with the character pitch set to number characters in an inch. Use number to specify the number of characters in an inch. Use pica to set character pitch to pica (10 characters per inch), or elite to set character pitch to elite (12 characters per inch) Use compressed to set character pitch to as many characters as the printer can handle. There is no standard number of characters per inch for all printers; see the terminfo database (see terminfo(4)) for the default character pitch for your printer. This option may not be used with the -f option. stty=stty-option-list Prints the request using a list of options valid for the stty command (see stty(1). Enclose the list in single quotes (`') if it contains blanks. -P page-list Prints the pages specified in page-list in ascending order. Specify page-list as a of range of numbers, single page number, or a combination of both. -P can only be used if there is a filter available to handle it; otherwise, the print request will be rejected. -p Enables notification on completion of the print request. Delivery of the notification is dependent on additional software. -q priority-level Assigns the print request a priority in the print queue. Specify priority-level as an integer between from 0 and 39. Use 0 to indicate the highest priority; SunOS 5.8 Last change: 16 Jan 1998 4 User Commands lp(1) 39 to indicate the lowest priority. If no priority is specified, the default priority for a print service is assigned by the LP administrator. The LP administrator may also assign a default priority to individual users. -s Suppresses the display of messages sent from lp. -S character-set|print-wheel Prints the request using the character-set or print- wheel. If a form was requested and requires a charac- ter set or print wheel other than the one specified with the -S option, the request is rejected. Printers using mountable print wheels or font cartridges use the print wheel or font cartridge mounted at the time of the print request, unless the -S option is speci- fied. Printers Using Print Wheels: If print wheel is not one listed by the LP administrator as acceptable for the printer the request is rejected unless the print wheel is already mounted on the printer. Printers Using Selectable or Programmable Character Sets: If the -S option is not specified, lp uses the standard character set. If character-set is not defined in the terminfo database for the printer (see terminfo(4)), or is not an alias defined by the LP administrator, the request is rejected. -t title Prints a title on the banner page of the output. Enclose title in quotes if it contains blanks. If title is not not specified, the name of the file is printed on the banner page. -T content-type [-r] Prints the request on a printer that can support the specified content-type. If no printer accepts this type directly, a filter will be used to convert the content into an acceptable type. If the -r option is specified, a filter will not be used. If -r is speci- fied, and no printer accepts the content-type directly, the request is rejected. If the content-type is not acceptable to any printer, either directly or with a filter, the request is rejected. -w Writes a message on the user's terminal after the files have been printed. If the user is not logged in, then mail will be sent instead. -y mode-list SunOS 5.8 Last change: 16 Jan 1998 5 User Commands lp(1) Prints the request according to the printing modes listed in mode-list. The allowed values for mode-list are locally defined. This option may be used only if there is a filter available to handle it; otherwise, the print request will be rejected.
OPERANDSThe following operands are supported: file The name of the file to be printed. Specify file as a pathname or as a hyphen (`-') to indicate the standard input. If file is not specified, lp uses the standard input. USAGE See largefile(5) for the description of the behavior of lp when encountering files greater than or equal to 2 Gbyte ( 2 **31 bytes). EXIT STATUS The following exit values are returned: 0 Successful completion. non-zero An error occurred.
FILES/var/spool/lp/* LP print queue. $HOME/.printers User-configurable printer database. /etc/printers.conf" System printer configuration database. printers.conf.byname NIS version of /etc/printers.conf. fns.ctx_dir.domain NIS+ version of /etc/printers.conf.
ATTRIBUTESSee attributes(5) for descriptions of the following attri- butes: SunOS 5.8 Last change: 16 Jan 1998 6 User Commands lp(1) ____________________________________________________________ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | |_____________________________|_____________________________| | Availability | SUNWpcu | |_____________________________|_____________________________| | CSI | Enabled (see NOTES) | |_____________________________|_____________________________|
SEE ALSOcancel(1), enable(1), lpq(1B), lpr(1B), lprm(1B), lpstat(1), mail(1), postprint(1), pr(1), stty(1), accept(1M), lpadmin(1M), lpfilter(1M), lpforms(1M), lpsched(1M), lpshut(1M), lpsystem(1M), lpusers(1M), printers(4), printers.conf(4), terminfo(4), attributes(5), environ(5), largefile(5), standards(5)
NOTESCSI-capability assumes that printer names are composed of ASCII characters. Printers that have a 4.x or BSD-based print server. are not configured to handle BSD protocol extensions. lp handles print requests sent to such printers in the following ways: 1. Print requests with more than 52 filenames will be trun- cated to 52 files. lp displays a warning message. 2. The -f, -H, -o, -P, -p, -q, -S, -T, and -y options may require a protocol extension to pass to a print server. If lp cannot handle the print request, it displays a warning message. LP administrators enable protocol extensions by setting a printer's bsdaddr entry in /etc/printers.conf. Changing the bsdaddr entry in /etc/printers.conf to: destination:bsdaddr=server,destination,Solaris generates a set of BSD print protocol extensions that can be processed by a Solaris print server. lp supports only Solaris protocol extensions at this time. SunOS 5.8 Last change: 16 Jan 1998 7